The PCI Blog is written by our team of editors, as well as industry contributors, and includes thought provoking opinions, trends, and essential paint and coatings industry information.
In a recent article by Kristin Johansson in Paint & Coatings Industry magazine, she reviewed the market drivers in the coatings industry and commented that sustainability is now less overt and more embedded within companies. Undoubtedly this is true, however you may feel there is a 'but' coming up!
Surface appearance can change your perception of color. Think of a glossy magazine. If the light is shining directly on the page, you may need to tilt the magazine and change the reflection angle to clearly see the colors.
The concept of color affecting mood is nothing new. Ancient Egyptians and Chinese practiced chromotherapy, using colors to heal various maladies. Today's color theory, color psychology and color therapy are our modern equivalents.
I work for a powder coating facility and we are trying to find research or any publications describing the differences between e-coating and underbody powder such as Interpon's A1000 series. Essentially, is underbody powder coating a viable alternative to e-coat?
A wrap up of the 43rd Annual Future of Coatings Under Study (FOCUS) Conference in Troy, MI, with a Keynote Address by Jill Seebergh, Senior Technical Fellow at The Boeing Company, who discussed technologies and challenges for exterior painting of commercial airplanes.
Regardless of the nature of your business, being seen on the Internet is a highly recommended way to getting more calls from paying customers. This includes customers who are not looking for you specifically, yet they need your services. People who would usually go to your competitors would now be calling your painting company instead!
The results of a survey conducted at the 2018 American Coatings Conference involving topics such as the technologies and markets coatings companies find most important, drivers for R&D, hot topics and regulations.
I have a question for you about allowable oven temperature variation. Our ovens were recently calibrated and were 1 degree off from our control unit reading to what was measured inside. Due to our ISO regulations I may possibly need to shut them down until it is exact. I know temperature variations are needed to keep minimal but this sounds ridiculous.
Subscribe
Recent Comments
Broken Planet Stargazing Hoodie
Can we apply form the out of USA...
Education for Kids
The team at window film brooklyn is...
Strategic maintenance