This new category of spray-applied waterproofing coatings are seamless, rugged, fast curing, impervious to water, able to bridge cracks, and capable of lasting decades without extensive maintenance.

With more focus on environmental protection all over the world, powder coatings will have greater application prospects in the near future.

Advances in microencapsulation have enabled development of smart coatings that can heal themselves if damaged.

The silicone-epoxy hybrid resin technology combines the positive effects of an aliphatic epoxy resin, like corrosion protection and chemical resistance, with the UV resistance and low yellowing characteristics of an alkoxy silicone resin.

This new generation of liquid organic corrosion inhibitors can be used to enhance the performance of nontoxic anticorrosive pigments in direct-to-metal coatings.

Ganicin™ is a zinc-rich, corrosion-resistant coating system for the general industrial segment.

Sherwin-Williams Protective & Marine Coatings was called on to provide a coating solution for the cast and wrought iron substrate, with some new steel sections. Anti-corrosion protection was required for a minimum period of 25 years.

A traditional protective coating system on a metal substrate generally consists of a pretreatment, primer and a topcoat.

Axalta Coating Systems is celebrating 50 years of Nap-Gard^® fusion-bonded epoxy thermosetting coatings.

MCI®-2020 is an organic, surface-applied, migrating corrosion inhibitor designed to penetrate through cementitious materials including concrete, mortar and limestone.