Concrete coatings present unique challenges due to the substrate's variability, requiring precise preparation and coatings with specific performance properties for durability and aesthetics.
Co-solvent choice is a significant challenge faced by waterborne coatings formulators, and its influence on early hardness development and early water resistance is often overlooked.
This article, the conclusion of a five-part series, covers work done on using reactive surfactants to make styrene acrylic emulsions with better water resistance.
This article, the fourth in a series, covers work done to improve the water resistance of water-based emulsions by replacing conventional emulsion surfactants with surfactants that will react into the polymer matrix.
This article, the third in a series, covers work done to improve the water resistance of water-based emulsions by replacing conventional emulsion surfactants with surfactants that will react into the polymer matrix.
This article, the second in a series, covers work done to improve the water resistance of water-based emulsions by replacing conventional emulsion surfactants with surfactants that will react into the polymer matrix.
This article, the first in a series, covers work done to improve the water resistance of water-based emulsions by replacing conventional emulsion surfactants with surfactants that will react into the polymer matrix.
Two of the more common 2K coatings systems are polyurethane and epoxy. This and next month’s Formulating with Mike column will concentrate on urethanes, with this issue focusing on polyurethane polymers.
This month’s Formulating with Mike column continues the discussion on resins, with a focus on epoxy curing agents. When it comes to great adhesion, chemical resistance, and corrosion resistance, an epoxy is hard to beat. There are different epoxy curing agents, and each one provides different properties that can be suited for a wide variety of end-use applications.