Calorplast heat exchangers are made of PVDF, PP, PE and PFA, and are designed for heating or cooling in corrosive applications. They are available as immersion, tube-plate, flexible, compact shell

When your product has gone through the process of being finished, the last thing you want is debris falling from your conveyor onto these parts. Company will be exhibit its

TDC/Midwesco 52" spray booth cartridge filters are designed to deliver time and maintenance savings for the coating industry. The extended-length cartridge replaces two standard-length, 26" cartridges in different types of

The association announces its technical program, exhibit and education program at the 49th (2006) SVC Annual Technical Conference in Washington DC at the Marriott Wardman Park Hotel on April 22-27,

Model 550 uses a novel, non-contact measurement technique based on a high frequency ultrasonic transducer to predict the final cured thickness of uncured powder coatings on a range of substrates,

MP24PC Integra incorporates feeding, twin-screw extruding, cooling and flaking in one compact unit. It meets a growing demand for a versatile, rapid response system to fulfill batch production needs. It

Identify Contaminant Source We sand aluminum die-cast parts for recoating when they have specks (dirt, metal, dust, etc.) using 120-grit sandpaper on an orbit sander. After recoating the parts, we

Engineered Products and Services Inc. (EPSI), a masking and hanging company, has moved to its new facility in Cerritos, Calif. The new building is located at the heart of Cerritos Industrial Center and features ample warehouse space, proximity to major freeways and an access to a sea port nearby. This move allows EPSI to increase its storage capability as well as increase its production capacity, resulting in shorter lead times and on time deliveries for our valued customers.

General Motors will cut at least 25,000 employees at U.S. assembly plants over the next three years, GM Chairman Rick Wagoner told shareholders at GM's annual meeting last month. Cost reduction and capacity utilization is essential for GM to turn around its North American operation, Wagoner says. "In order to achieve full capacity utilization based on conservative volume planning scenarios, we expect to close additional assembly and component plants over the next few years," Wagoner says, "and to reduce our manufacturing employment levels in the U.S. by 25,000 or more people in the 2005 to 2008 period." Wagoner says those actions will generate annual savings of approximately $2.5 billion.

In April, Tiger Drylac Powder Coatings moved to its new facilities at 1261 E. Belmont St., Ontario, Calif. The 35,000ft2 building provides 9,000 ft2 of office space, housing the company's headquarters personnel, plus the West Coast sales staff.