SILRES IC 368 has been formulated so that an addition of only 15 percent is sufficient to improve the UV and weathering resistance of the organic binder in a coating system – without detracting from its mechanical properties.

The one-stop modular system of four non-APEO-containing and low-VOC Dispersogen® dispersing agents for waterborne pigment preparations offers simplicity without compromising on high performance.

An updated version of the Newson Gale Earth-Rite® static electricity monitoring system provides an enhanced margin of safety when Type C FIBCs or similar static-dissipative containers are used to transfer bulk powdered and other solid materials in hazardous area applications.

GENOMER® 1119 and GENOMER 1121M are recommended for radically curable inks, coatings and adhesives.

CERAFLOUR® 1000 is based on renewable raw materials and represents an alternative to natural and synthetic waxes.

Tallicin® 4040 deaerator for polyurea polyaspartic coatings used on concrete, metal, wood and other substrates allows the formulator to minimize surface defects in a 100-percent solids coating system without the use of solvents.

Offering intense sparkle and powerful luster, Xirallic® effect pigments are especially suited for use in automotive coatings due to their fine particle size and narrow particle size distribution.

Boltorn™ P501 is developed for UV-curable hardcoat applications where high quality and durability are important.

The new DXN portable ultrasonic flow and heat meter is built on innovative hybrid metering technology that automatically switches between transit time and Doppler modes as needed.

A new 34-inch sanitary stainless steel pin mill, CIM-34-SS provides coarse-to-fine grinding of friable powders, flakes and granules into controlled particle sizes.