New literature from ALMCO, Inc. describes the Model S2-30, a new high-production spindle-finishing machine for deburring small gears and machined parts. The machine requires just 15 ft2of floor space, yet reportedly is capable of finishing up to 480 pieces per hour with extreme uniformity and consistency.

New literature from ALMCO, Inc. describes the Model S2-30, a new high-production spindle-finishing machine for deburring small gears and machined parts. The machine requires just 15 ft2 of floor space, yet reportedly is capable of finishing up to 480 pieces per hour with extreme uniformity and consistency. Parts measuring up to 2-l/2 x 3 inches are loaded on one or both of the machine’s spindles, either manually or with robots if desired, and unloaded after a typical 15-second deburring cycle.

The literature details how spindle finishing offers numerous benefits not possible with conventional finishing equipment. The highest precision of parts is attained, and many can be deburred in no other way because of requirements for extreme accuracy. Process repeatability is assured through elementary adjustments of the equipment and simple procedures performed without special operator skills.

For a copy of the literature, call 800.521.2740 or visitwww.almcoinc.com.